Calibrated round bar

Metal round bars are widely used in private and corporate construction, because the round bars is an excellent tool for reinforcement bundling, joining elements of metal structures and reinforced concrete structures. Also, round steel bars are often used in mechanical engineering, in the manufacture of machine tools, in the manufacture of decorative elements for exterior and interior decor. In service metal centre SavVATS you can order and buy a calibrated round bar of required size, thickness and length. Round steel bars sizes in our assortiment are presented from 10mm to 30 mm.

Hot-rolled steel round bars (DSTU 4738: 2007)

Steel round bar - it's a type of rolled steel used as a blank for the manufacture of pipes and in mechanical engineering for manufacture of various machine parts.

The standard applies to hot-rolled steel rods of round cross-section with a diameter from 5 to 270 mm. Round bars with a diameter more than 270 mm are manufactured by agreement with the consumer.

Round steel bars are distinguished by accuracy:

• A - high accuracy;

• B - increased accuracy;

• C - standard accuracy;

 

Steel rod diameter, cross-sectional area and mass of 1 m in the table below.

Diameter, mm	Cross-sectional area, mm²	Mass of 1m, kg	Meters per ton
10	78,54	0,617	1622
11	95.03	0.746	1340.5
12	113.1	0.888	1126.4
13	132.73	1.042	959.7
14	153.94	1.208	827.5
15	176.71	1.387	720.9
16	201.06	1.578	633.6
17	226.98	1.782	561.2
18	254.47	1.998	500.6
19	283.53	2.226	449.3
20	314.16	2.466	405.5
21	346.36	2.719	367.8
22	380.13	2.984	335.1
23	415.48	3.261	306.6
24	452.39	3.551	281.6
25	490.87	3.853	259.5
26	530.93	4.168	239.9
27	572.56	4.495	222.5
28	615.75	4.834	206.9
29	660.52	5.185	192.9
30	706.89	5.549	180.2