Structures using square and rectangular pipes are able to withstand significant mechanical and vibration loads. They are also used in simpler cases, for example, for pillars and fences.

Square pipes are manufactured in accordance with the GOST 13663-86 standards. Depending on the manufacturing technology, the pipe is divided into:

    • seamless cold formed,

    • seamless hot formed,

    • electric-welded,

    • electric-welded cold formed.

We have a large range of rolled pipes (sizes in the table below), which are widely used in various industries: mechanical engineering, construction, during repairs, etc.

SavVATS offer square pipes with sizes from 20x20 mm to 100x100 mm. We also offer rectangular pipes with sizes from 30x20 mm to 120x80 mm. This type of square pipe is used in the construction of sports grounds and stadiums, warehouses, shopping malls, lifts, bridges, as well as in the construction of tall buildings and cranes.

SavVATS company specialists offer cutting of products on order.

The cost of a square pipe is depend on the cross-sectional diameter and the material from which the products are made. By purchasing products from us, you get the optimal price for high quality products (we can offer discounts for wholesale orders), which is significantly superior to similar products of our rivals.

You can place an order, clarify the cost and buy square pipes in Kiev by calling tel. (044) 201-61-11, (096) 21-28-228.

In accordance with the type, pipes must comply with GOST standards:

    • rectangular pipes (GOST 8645-68);

    • square pipes (GOST 8639-82);

    • oval pipes (GOST 8642-68).

Our square pipe manufactured according to the current GOST standards with the following dimensions:

    • rectangular steel pipe with a sizes from 15x10mm (28x25mm) to 180x150mm (230x170mm) mm and with thickness from 1 to 12 mm (from 1.5 to 20 mm) (in brackets - parameters of special sizes);

    • square pipe with sizes from 10 to 180 (from 32 to 65) mm and with thickness from 1 to 14 mm (from 4 to 6 mm) (in brackets - parameters of special sizes);

    • oval pipe with sizes from 6x3mm (17x6.6mm) to 90x50mm (72x22mm) and thickness from 0.5 to 2.5 (from 1 to 1.7) mm (in brackets - parameters of special sizes).

According to GOST requirements, pipes are produced in the following lengths:

measured length:

    • from 4.5m to 11.0m - for seamless cold formed pipes;

    • from 4.0m to 12.5m - for seamless hot-rolled pipes;

    • from 5.0m to 9.0m - for electric-welded pipes.

unmeasured length:

    • from 1.5m to 9.0m - for seamless cold formed or electric-welded pipes;

    • from 4.0m to 12.5m - for seamless hot-rolled pipes.

multiple measured length with 5 mm allowance for each cut:

    • from 1.5m to 11.0m - for seamless cold formed pipes;

    • from 4.0m to 12.5m - for seamless hot-rolled pipes.

Manufactured from the following steel grades:

    • electric-welded pipes (C10E, S275JR, S275JO, S235JR, C22E);

    • hot-rolled and cold formed pipes (C10E, DC01, C22E, C35E, C45E).

The range of products we offer:

1. Square pipes (GOST 8639-82)

This standard applies to steel seamless hot-rolled and cold formed, electric-welded and electric-welded cold formed pipes. Most often, square pipe is used for the manufacture of metal structures.

Shapes and dimensions of square pipes must correspond to the sizes in the table below:

2. Steel rectangular pipes (GOST 8645-68)

This standard applies to seamless steel hot-rolled, cold formed and electric-welded pipes. As well as square pipes, rectangular pipe is used for the manufacture of metal structures.

Steel rectangular pipes parameters (GOST 8645-68):