You can place an order or find out the cost and assortment and buy profile pipes in Kiev by calling
Service metal center SavVATS it's own production and supply of the highest quality black rolled metal in Kiev and Ukraine. We have always availeble wide range of only high-quality ferrous metal products, including steel sheet metal: standard sheet metal, corrugated steel sheets for construction, repair, and construction of metal structures. Depending on each specific standard size of sheet metal, different steel and production technology are used. Our wide range of metal includes all types of steel sheets, depending on the steel grade and thickness. Cold-formed and hot-rolled steel sheets are always available with delivery across Kiev and Ukraine.
Hot-rolled steel sheet
Cold formed steel sheet
Corrugated steel sheet
Rolled steel sheel (DSTU 8971:2019)
Cold-rolled steel sheets are used in the construction of structures and for housings of various buildings. Also as a coating material for thermal insulation of piping equipment located indoors or outdoors.
The current DSTU standard determines the parameters of steel sheet metal with width of 500 mm and more. This metal is supplied in sheets with thickness from 0.35 to 5.00 mm or in coils with a thickness from 0.35 to 3.50 mm.
Steel sheet metal is divided is classified according to:
flatness: normal (FN), increased (FI), high (FH), extra high (FE);
thickness: normal (BT), increased (AT), high (CT);
length: normal (BL), increased (AL), high (CL);
width: normal (BW), increased (AW), high (CW).
edge shape: edged (E), unedged (UE).
Weight of 1 m² of steel sheet complies with the standards of DSTU 8971: 2019
|Thickness S, mm||0,8||1,0||1,2||1,5||2,0|
|Weight of 1 m², kg||6,400||8,000||9,600||12,000||16,000|
Hot-rolled steel sheet
Hot-rolled steel sheet (DSTU 8540:2015)
Steel sheet Steel sheet it's hot-rolled steel in sheets with width from 500 mm (steel sheets have a thickness from 0.40 mm to 160 mm) or in coils (thickness from 1.2 mm to 12 mm). This sheet is used in the production of longitudinal electric-welded pipes or in the production of bent profiles. It is also widely used in construction as a raw material in the production of metal structures. Steel sheet metal are suitable for welding in the manufacture of fragments and parts of boilers and vessels operating under pressure at normal, high or low temperatures.
Steel sheet can be classified according to:
accuracy (thickness up to 12 mm): normal (B) or increased (A);
flatness: high (FH), normal (FN), increased (FI) or extra high (FE);
edge shape: edged (E), unedged (UE).
Weight of 1 m² of steel sheet complies with the standards of DSTU 8971:2019 and DSTU 8540:2015
|Thickness S, mm||2,0||3,0||4,0||5,0||6,0||8,0||10,0||12,0||14,0||16,0||18,0||20,0|
|Weight of 1 m², kg||16,000||24,000||32,000||40,000||48,000||62,800||78,500||94,200||109,900||125,600||141,300||160,000|
Corrugated steel sheet
Corrugated stainless steel sheet usually has a rhombic or rhomboid pattern. It is used as a wall or floor covering. Thickness of the sheet determines the area of its application. So, corrugated stainless steel sheet with a low thickness (3 mm thick) is used for civil structures, and with a high thickness - at industrial facilities.
Main purpose of a corrugated stainless steel sheet is to resist sliding when walking - it is used as an anti-slip floor covering. Most often, such products are used as steps for exiting escalators, as well as to increase the strength of stairs and flooring.
Offered by SavVATS Ltd. corrugated steel sheet with rhombic corrugation of general purpose complies with DSTU 8783: 2018. We supply these products in sheets and rolls with corrugation on one side. Herewith, the riffles on the sheets have a height at least 0.5 mm (usually 0.2 - 0.3 from the thickness of the sheet base).
Size of a rhombus in corrugated steel sheet is usually in the range from 25x60 mm up to 30x70 mm. The manufacturer set the the location of the rhombuses along or across the sheet and configuration of the corrugation. A steel sheet with rhombus corrugation usually has a distance between the corrugations of 20, 25 or 30 mm.
Steel sheet metal
In the production of steel sheet metal with rhombus corrugation, rolled edge and one-sided corrugation, carbon steel is used with a chemical composition according to DSTU 2651: 2005. Corrugation on the sheet metal are 1.5 mm high and placed at a distance 40 mm from the side edge. Steel sheet metal can have a width from 600 to 2200 mm and a length from 1400 to 8000 mm.
We can offer corrugated sheets of other sizes by agreement with the customer.
Thickness and weight of 1 m² of corrugated steel sheet (DSTU 8783:2018)
|Sheet base thickness, S, mm||Corrugation width, b, мм||Weight of 1 m², kg|
Hot-rolled steel sheet metal (S235JR;S355JR)
SavVATS Ltd. offers a wide range of hot-rolled steel sheets (including high-quality hot-rolled steel sheets) and will help you make the best choice.
Hot-rolled steel sheet is characterized by increased hardness, corrosion resistance, heat resistance and elasticity. Hot-rolled steel sheet contains carbon, iron and alloying elements to improve the characteristics of the material: up to 2.5% (low-alloy steel), 2.5-10% (medium-alloyed), high-alloy (more than 10%).
We have always available wide range of hot-rolled sheet steel for very affordable prices.
Hot-rolled steel sheets are used for:
garden and yard fences, balconies, windows, heating batteries, verandas etc.;
steps of flight stairs and decking.
Marking "A" (normal accuracy) and "B" (increased accuracy) describes the sheet rolling accuracy, and for annealed high-tempered hot-rolled sheet used marking"T" (not heat-treated sheets are not marked).
Trimming the sheet at right angles (if the crescent shape and oblique cut don't change the dimensions specified in the standards) is used to maintain the nominal size of the steel sheet. Although deviations in sheet dimensions are permissible within: +20 mm (for hot-rolled unedged sheet).
If necessary, the maximum deviations in length are observed:
+ 20 mm with a sheet length more than 3000 mm;
+10 mm with a length from 2000 mm to 3000 mm;
+6 mm with a length from 1500 mm to 2000 mm;
+5 mm with length up to 1500 mm.
In other cases, when cutting rolled steel into sheets on a continuous mill, the standard deviation of hot-rolled steel sheet dimensions is allowed:
+25 mm with a sheet length more than 3000 mm;
+20 mm with a length from 1500 mm to 3000 mm;
+10 mm with length up to 1500 mm (for special customer requirements).
The maximum deviation for a hot-rolled sheet with a cutted edges doesn't exceed +10 mm with a sheet width over 800 mm and not more than +6 mm with a sheet width up to 800 mm.
Hot-rolled sheet steel can be with deviations in dimensions: + 15mm with a sheet length over 1500 mm and +10 mm with length up to 1500 mm.
If hot-rolled steel is in rolls (with cutted edges), deviations for sheets with a width from 1600 mm and more - not more than +7 mm; for sheets width from 1000 mm to 1600 mm - not more than +5 mm; for sheets width from 500 mm to 1000 mm - not more than +2 mm.
Cold-formed sheet (DC01;S235JR)
Cold-formed sheets according to DSTU 8971: 2019, with thickness from 0.5 to 2.5 mm, made from steel grades DC01 and S235JR.
How cold-formed steel sheet is made:
firstly, we make sheets from a roll by using the hot rolling method;
secondly, cold-formed sheet goes through the etching procedure;
and the final deformation occurs when the metal is rolled on mill rolls.
Due to the fact that the time and energy costs for the manufacture of such products increase, and the use of additional equipment is required, the price of cold-formed sheet will be higher. This sheet have a smoother surface. It is more flexible.
We offer cold-formed steel sheets (width from 500mm) in:
sheets with a thickness from 0.5 to 3.0mm;
rolls with a thickness from 0.5 to 3.0mm.
Weight of the cold-formed sheet depend on length and thickness of the steel. It is used in aircraft construction, agricultural machinery, as well as in the production of profiled roofing, wall and perforated sheets.
30 years of experience
In production and wholesale trade
of rolled metal in Ukraine.
All production are certified and meet all the highest quality standards.
Best price guarantee for wholesalers from the manufacturer.
We are trusted
We are chosen by construction companies, retail chains, retail sales centers.
Delivery across Ukraine. Branches in Mykolayiv, Zaporizhzhya, Donetsk regions.
The application of steel sheet is quite wide. Steel sheet mertal is very often used by private and individual builders in the construction of small projects and in the construction of private metal structures, but it's also used in the creation of cladding, in the installation of metal structures, in the production of frames, hulls, in the construction of ships, etc. Our managers are always happy to help with the calculation of the order for the purchase of steel sheet metal and help with the selection of the right steel sheet for your specific case. Call or leave a request on our website and we guarantee the best conditions for the purchase of steel sheet in Kiev and Ukraine.
Rolled metal it's a SavVATS metal service center core business. A wide range of suppliers, our own import-export of metal, our own production - all this guarantees a large assortment of steel sheet metal, affordable prices, continuous availability and flexible conditions of cooperation for our partners. You can order and buy steel sheet metal from us in Kiev (Svyatoshino, Pechersk, Goloseevo, Vydubychi, Stolychne Highway, Kharkivskyi, Darnitskyi, Dniprovskyi, Podil, Shevchenkivskyi districts) and in all suburbs of Kiev - Borispil, Irpin, Bucha, Ukrainka, Vyshhorod, Obukhiv, Vyshneve. Available steel sheet metal 2000x1000x0.8 mm according to DSTU 8971: 2019, corrugated hot-rolled sheet 3mm, steel expanded metal sheet, sheet steel 2000x1000x3 and many other types of steel sheet.
Steel sheet metal prices depends on many factors: cost of the metal, customs duties, the cost of producing and processing sheet metal, delivery terms, exchange rates and a number of other factors, according to this prices can changes frequently. Our deliveries and production are as differentiated as possible, which allows us to offer our customers competitive prices, and this is a guarantee of cost savings when building using sheet metal. You can always know the exact prices for cold-formed steel sheet, hot-rolled steel sheet, corrugated sheet by calling to our managers or by leaving a request for a free call on the website. We will be happy to help you!